When I was in the hardware store looking at U bolts for my butt sag bar, I saw square U bolts. Hmmmm... Looking at the misalignment again I noticed that the square U bolt would wrap around the bottom but also sit flat on the braces.
Thursday, February 10, 2011
Lift'em Up Part WHATEVER!
The three inch lift created several problems. One of which was the way the front body attaches to the king pin frame. The three inch lift created a space and what once was in sync is no longer. But I have a solution.
When I was in the hardware store looking at U bolts for my butt sag bar, I saw square U bolts. Hmmmm... Looking at the misalignment again I noticed that the square U bolt would wrap around the bottom but also sit flat on the braces.
I drilled a hole that was about 2 1/4 inches inches above the original hole. Now instead of two bolts that wrap around the pipes, I have three.
Here's one side....
And the other side. Problem solved! (And the crowd goes wild....)
When I was in the hardware store looking at U bolts for my butt sag bar, I saw square U bolts. Hmmmm... Looking at the misalignment again I noticed that the square U bolt would wrap around the bottom but also sit flat on the braces.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment